TAULMAN NYLON 645 FILAMENT 1LB
Start Here -> Please check to insure that your printer can print at temperatures from 242C to 248C
There are just a few items to note so you eventually get the best from 645's properties.
1. Taulman Nylon 645 will not print/stick to glass or aluminum print tables. The best table material for a new user is a flat piece of unfinished poplar wood or blue painters tape. These are at all hobby stores or home depots. For perfect adhesion, use low cost garolite (LE)..
2. 645's bonding is best at a true 245C.
3. You may have heard nylon emits fumes. 645 does not emit any fumes for printing. Actually, there is no odor at all from 645. You may see what looks like puffs of smoke, but it is actually water vapor or steam. If you are interested in seeing a full report on extruding Nylon based materials, please check this link as it's an extensive report used by all of industry.
4. 645 is an industrial line and as such is designed to print in greater layer heights than you usually print. There is no need to print fine layers unless you need high vertical resolution. We suggest 60% OF NOZZLE DIA.
NOTE: Please make sure to dry the nylons if they've been left in any humidity at all (Including shipping). All nylons will re-absorb humidity from the surrounding air within just 18 hr. So , please make sure to store nylons, when not in use!
We have received confirmation emails from individual "users" that the following printers have had no issue printing 645 with only adding garolite, tape or wood to the print table:
Please note that the use of taulman products in any of the listed printers may not be covered under your warranty.
There are just a few items to note so you eventually get the best from 645's properties.
1. Taulman Nylon 645 will not print/stick to glass or aluminum print tables. The best table material for a new user is a flat piece of unfinished poplar wood or blue painters tape. These are at all hobby stores or home depots. For perfect adhesion, use low cost garolite (LE)..
2. 645's bonding is best at a true 245C.
3. You may have heard nylon emits fumes. 645 does not emit any fumes for printing. Actually, there is no odor at all from 645. You may see what looks like puffs of smoke, but it is actually water vapor or steam. If you are interested in seeing a full report on extruding Nylon based materials, please check this link as it's an extensive report used by all of industry.
4. 645 is an industrial line and as such is designed to print in greater layer heights than you usually print. There is no need to print fine layers unless you need high vertical resolution. We suggest 60% OF NOZZLE DIA.
NOTE: Please make sure to dry the nylons if they've been left in any humidity at all (Including shipping). All nylons will re-absorb humidity from the surrounding air within just 18 hr. So , please make sure to store nylons, when not in use!
We have received confirmation emails from individual "users" that the following printers have had no issue printing 645 with only adding garolite, tape or wood to the print table:
Please note that the use of taulman products in any of the listed printers may not be covered under your warranty.
|
Makerbot Replicator I Dual Ext
Makerbot Replicator II Dual Ext PrintrBot PrintrBot Plus Ultimaker MakeMendel Rostock SeeMeCNC 2BEIGH3 BukoBot 3D Touch Dual Head Gigabot |
Mendel
Lulzbot inDimension3 Mendel Max Makergear RepRap RepRap Pro Rostock Cerberus UP Bits from Bites Afinia Robot Factory PowerWasp RoboBot |
For more information click here.
